This GDV Kit contains the discrete components (Resistor, Capacitor, Sockets, LED's, Wires..etc.) needed to complete a GDV PCB Controller.

               ("Micro-Controller" + "LCD Screen" sold separately)
Item # 8500-10
cont.
Component List (I)
  Name QTY
17)   Batt. 3 vdc   10mm
 1
18)  Batt. Holder 10mm  1 
19)  Solid State Relay  1
20)  Cable, Switch & LED 6"   6
21)  Connector 1 x 2  6
22)  Connector 2 x 5  1
23)  Connector 1 x 3  1
24)   LED Holder T 1 3/4  3
25)   LED RED/YLW/GRN   1 ea. 
26)  Switch, Rocker  1
27)  Switch, Momentary   1
28)  2 Pos. PC Term  4
29)    
30)
31)    
32)    
Component Kit.
GDV Controller Component Listing.
GDV CNTLR Component List (I)
  Name QTY
1)  10 K ohms
 9
2)  220  ohms  8
3)  470  ohms  3
4)  0.1 uf cap  4
5)  33 uf 35 v cap  1
6)  10 uf 50 v cap  1
7)  6   pin socket  1
8)  8   pin socket  1
9)  24 pin socket  1
10)   5 Vdc reg.  1
11)  DB9F connector  1
12)  2.1mm Pwr Jack  1
13)  DS1302 Clk Chp  1
14)  32.768k Res. Clk  1
15)  Mini Jumper Shunt  1
16)  Piezo(Beeper)  1
Not sold separately.
Highlights:
This Security / Educational kit is for any resident with a Motorized Garage Door. When completed and connected, it can be set to automatically close a standard single home Garage Door as though you were there pushing the button. With the Micro-Controller, clock chip, other components and the free downloadable program, you will be able to set / change the monitoring "Start - Stop" hours or put in a 24 hour continuous monitoring mode.
These are just a few of the features.

Full Assembly / Operational details are downloadable from the Resources Link.
$24.95

LITTLEHM,LLC

garagedoorvalet002007.gif

www.GarageDoorVALET.com

®

flag_usa.gif flag_usa.gif garagedoorvalet003003.gif
Copyright 2010 - 2015 LittleHM,LLC - All Rights Reserved
garagedoorvalet010001.jpg