tabr_n.gif
Note: One (1) 12.00" +/- .25" cable is included with every Switch Board Controller order. This cable is made here from two (2) 2 x 5 press connectors and 10 conductor flat ribbon cable.

 NOT SOLD SEPARATELY >...............Included with GDV SB....$0.00
The Magnetic Reed Switch is used in the Normally Open (NO) configuration. Distance between the 2 components when mounted should not be more then 3/4".
Note: This is a self contained purchased item that we get in for kits.

NOT SOLD SEPARATELY > .......................................................$5.95 per. pkg.
{Magnetic Reed Switch NO}
{GDV Switch Board Cable}
Item # 8700-20
Item # 8800-12
garagedoorvalet009010.jpg
{Wall Mount Power Supply}
Item # 8700-30
Wall Mount 2 prong 7 - 12 Vdc/ 0.5 to 1 amp power supply.
Note: This is a self contained purchased item that we get in for kits.

NOT SOLD SEPARATELY >.......................................................$3.95 per. unit
GARAGE DOOR VALET ACCESSORIES
garagedoorvalet016007.jpg
* (20 awg sold seperately)
garagedoorvalet003008.jpg
Used..."The Home Depot.com"...ITEM # 6542. .....Larger spools also available.
cerrowire #206-0101BA3...Mfgr. & number.
NOTE: THIS IS AN EXTERNAL LINK.
Highlights:
This Security / Educational kit is for any resident with a Motorized Garage Door. When completed and connected, it can be set to automatically close a standard single home Garage Door as though you were there pushing the button. With the Micro-Controller, clock chip, other components and the free downloadable program, you will be able to set / change the monitoring "Start - Stop" hours or put in a 24 hour continuous monitoring mode.
These are just a few of the features.

Full Assembly / Operational details are downloadable from the Resources Link.

LITTLEHM,LLC

garagedoorvalet016004.gif

www.GarageDoorVALET.com

®

flag_usa.gif flag_usa.gif
Copyright 2010 - 2015 LittleHM,LLC - All Rights Reserved